Saveourh2o is supported by its audience. When you purchase via our links, we may get a commission. Learn more

How to Remove PUR Water Filter from Pitcher? – Only 4 Steps

how to remove pur water filter from pitcher

PUR pitcher models are the best-known PUR water purification product to provide on-demand potable water at a reasonable price. It is more practical compared to buying a whole countertop filtration system, which costs more.

If you’re a new user, changing PUR filter is one of your primary concerns. Therefore, it is a must to know how to remove PUR water filter from pitcher. But don’t worry, you don’t have to be tech-savvy to accomplish it.

Scroll down this article to find out the easiest steps to detach the PUR pitcher filter. Plus, I have included the bonus steps for your future replacement filter installation!

Removing an Old PUR Pitcher Filter

changing-pur-water-filter

Generally, removing the old filter is always imperative for preventive maintenance. Whether you’re cleaning or changing PUR water filter, you have to learn how to disconnect the filter from the pitcher properly.

You don’t need to use any hand-powered DIY tools to do it — your bare hands will do the trick. To remove the PUR filter, grasp the old filter and unscrew it.

You can do this by taking the lid off the pitcher and pulling the pour tray that holds the filter. It is the blue plastic reservoir inside. Hand-unscrew the filter by rotating it counterclockwise until it separates from the tray.

Once the filter is separated, make sure to throw it away with the rest of the garbage.

PUR Pitcher Filter Replacement Installation

Replacing PUR water filter is more than just disconnecting the old filter from the pitcher. You have to be familiar with the whole parts of a pitcher filtration system: lid, PUR filter cartridge, pour tray, and pitcher/dispenser.

PUR pitcher filters feature a 40-gallon filtration capacity and last for two months. There’s an LED light indicator attached to the lid — it will tell you the amount of time the filter has been used. A red light indicator means that your filter needs to be changed immediately.

Typically, once you purchase a PUR pitcher filter or any PUR models, you will receive a user guide or manual to operate it successfully. But if you don’t want to trouble yourself with flipping through the pages, I’m here to assist you!

What Will You Need in This Tutorial

changing-pur-filter

Simple and easy. These two words best describe this PUR pitcher replacement task. You don’t need a bunch of tools to help you complete this DIY activity :

1. New PUR pitcher filter

replacing-pur-water-filter

If you’re planning to replace your old pitcher filter this weekend, you should never forget to purchase a new filter beforehand. Before installing it inside the pour tray, you will have to soak it in cold water. This preparatory work will help you get rid of dust and dirt from the filter that may have accumulated in transit.

2. Basin

Don’t forget to bring a basin into the sink. You will have to fill it with cold water to rinse and soak the new filter. You can also use a small pot or whatever water container you have at home.

I prefer using a basin because it is used for universal washing and is always present in the kitchen. There’s no need to buy new washbowls or other kitchenware to soak the filter.

3. Microfiber Cleaning Cloth

change-a-PUR-water-filter

Use a microfiber cloth to remove moisture from the filter after washing. Unlike other reusable cleaning fabrics, microfibers can hygienically clean different types of objects and surfaces. They are also highly absorbent and can hold water seven times their weight. There’s no doubt they can dry your filter in no time.

Step by Step Instructions

Manual work doesn’t sound easy at all because it is exhausting most of the time. But don’t worry, no extreme physical movements are needed in this tutorial. Follow these four quick and easy steps to install your new PUR pitcher filter!

Step 1: Place the replacement filter into cold water.

Prepare a basin filled with cold water. Submerge the filter entirely in it and soak for 15 minutes. After such time, excess carbon will have come out from the filter. Set it aside.

Step 2: Remove the old filter.

As discussed earlier, removing the old filter is painless. You just have to twist it counterclockwise to fully unscrew it from the pitcher.

Pro Tip: Don’t install the new filter right away. Kindly wait for the pour tray to run empty, so it won’t be difficult for you to insert the filter.

Step 3: Rinse and attach the new PUR filter

Flush the new filter under the tap water for ten seconds. Rotate the filter while rinsing so you can wash all of the sides generously. Next, shake the filter to remove any excess water. You can also dry it with a microfiber cloth.

Grab the pour tray and secure the filter in the mounting hole. Hold the bottom of the filter firmly and turn it clockwise until you hear a clicking sound. It means that you have successfully installed the filter.

Pro Tip: If the filter sticks out of the pour tray, reinsert the filter. Rotate it clockwise until it fits snugly inside.

Step 4: Reset the filter and have it ready for use.

Press and hold the sensor reset button on the lid of the pitcher for five seconds. You will notice a blinking green light once the reset is complete and the filter’s ready for use.

Pro Tip: Some older pitcher and dispenser models don’t have a light indicator. Hence, it will be best to change them once or twice a month, depending on the household size and frequency of usage.

Conclusion

Pitcher filters are indeed one of the most convenient ways to provide fresh-tasting water for our family. They filter water as we pour them, and nothing is more satisfying than seeing clean and crisp drinking water.

Now that you have learned how to remove PUR water filter from pitcher, it will be easier for you to conduct a monthly inspection of the filter’s efficiently. Once you detect a problem, the additional installation procedure I provided will help you change the filter like a pro!

Any PUR pitcher problems? Feel free to comment below so I can incorporate them in the future tutorials.